Model 6514 Quick Results Guide 13
Remote command programming
The SCPI commands for speed, digits, filter, and rel are listed in Table 8. The commands
for ranging are listed in Table 4.
Table 8
SCPI commands: rate, digits, filter, and rel
Command Description
Rate commands:
[:SENSe[1]]:VOLTage:NPLCycles <n> Set voltage rate in PLCs: 0.01 to 10.
[:SENSe[1]]:CURRent:NPLCycles <n> Set current rate in PLCs: 0.01 to 10.
[:SENSe[1]]:RESistance:NPLCycles <n> Set resistance rate in PLCs: 0.01 to 10.
[:SENSe[1]]:CHARge:NPLCycles <n> Set charge rate in PLCs: 0.01 to 10.
Digits command:
:DISPlay:DIGits <n> Set display resolution: 4 to 7.
Median filter commands:
[:SENSe[1]]:MEDian:RANK <n> Set median filter rank: 1 to 5.
[:SENSe[1]]:MEDian[:STATe] <b> Enable or disable median filter.
Digital filter commands:
[:SENSe[1]]:AVERage:TCONtrol <name> Select filter control: MOVing or REPeat.
[:SENSe[1]]:AVERage:COUNt <n> Set filter count: 1 to 100.
[:SENSe[1]]:AVERage[:STATe] <b> Enable or disable digital filter.
Rel command:*
:CALCulate2:NULL:STATe <b> Enable/disable rel.
* Does not include commands to set and acquire rel values. See Section 7 of Model 6514 Instruction Manual.
To Next Page
Loading...
Need help?
General
