Kenmore 116.29229 User Manual

TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, the agitator must be cleaned every
time the belt is changed.
The agitator must also be cleaned
according to the following schedule:
Vacuum Cleaner Use Clean Agitator
HEAVY - every week
(used daily)
MODERATE - every month
(used 2-3 times//week)
LIGHT - every 2 months
(used 1 time/week}
IMPORTANT
Turnoff and unplug vacuum cleaner from
electrical outlet. Check and remove hair,
string and lint build-up frequently in the
PowerMate ® agitator and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris
located on the agitator or end caps.
AGITATOR ASSEMBLY
$- End Cap Beff pith _
°roJo°.,°,
LIGHT BULB CHANGING
WARNING
Electrical Shock Or Personal Injury
Hazard
Turn off and unplug vacuum cleaner
before performing maintenance to the
vacuum cleaner. Failure to do so could
result in electrical shock or personal
injury from the vacuum cleaner
suddenly starting.
_ CAUTION
Do not plug in or turn on until the vacuum
1. Remove PowerMate ® cover as shown in
BELT CHANGING AND AGITATOR
CLEANING (page 17) section.
_PuH out to I
left side L
2. Remove the light
bulb by pulling
straight out.
CAUTION
Push in
to right
3. To replace the
light bulb,
carefully insert
fully into slot.
4. Reinstall PowerMate ® cover see
BELT CHANGING AND AGITATOR
CLEANING (page 17) section.
NOTE: See PARTS AND FEATURES (page 5)
for Bulb number.
-18-

Kenmore 116.29229 Specifications

General

Brand	Kenmore
Model	116.29229
Category	Vacuum Cleaner
Language	English