Use KENMORE needles. The size of the
needle should conform with the size of
the thread and both should suit the
fabric. Kenmore needles are color-coded
by size for your convenience (See chart
on facing page)°
Never use a bent needle or one with a dull
point.
The exact length of your needle is shown
at left. Be sure you never use one m
your machine that is not this exact
length.
Flat
side
away
from
you
PLACEI_,_EHT OF NEEDLE
Raise needle bar to its highest position by
turning the hand wheel toward you,
Loosen the needle clamp screw. Holding
the needle with the flat side away from
you, slip the needle into the needle bar.
When it is in as far as it will go, tighten
the needle clamp screw with small screw_
driver provided in the accessory box,
Needte clamp
11
To Next Page
Loading...
Need help?
General
