Thenumberedstepsbelowfollow thenumbersontheillustrations.
Dotted lines show placeswhere the thread loops and then is
3ulledtight,
1. Drawthreadthroughthreadguide.
2. Draw thread into threading channel
towardyou.
3, Drawthreaddownchannelandaround
thespringwireasshown.
®
4, Draw thread up & through take-up
lever,
5, Draw thread down and into thread
guide.
6. Thread then is slipped into needle bar
thread guide.
7o Thread needle from front to back.
14