Kenmore 17881 User Manual

Bobbin cover
p ate
O
1_ Remove the bobbin cover plate by
pulling it toward you while pushing it
down stightlv.
2. Take the bobbin out and wind it,
(See page 12 for winding the bobbin.)
3o Insert bobbin into shuttle making sure
bobbin rotates counter clockwise°
4_ Pull 4-inches of thread through tension
slot of bobbin case and toward back of
machine as shown,,
5o Close the bobbin cover plate allowing
thread to emerge through slot in
needle plate°

Kenmore 17881 Specifications

General

Brand	Kenmore
Model	17881
Category	Sewing Machine
Language	English