You need to:
Tools and materials needed
• observe all governing codes and
ordinances.
• install this compactor as specified
in these instructions.
• have everything you need to
properly install compactor.
Freestanding compactor tools
5/16" box_nd__
_o wrench
r _gloves
scissors
• contact a qualified installer to
insure that compactor is installed to
meet all national and local codes and
ordinances•
Check location where compactor will
be installed. The location must provide:
• square opening for proper
operation and appearance.
• a cabinet front that is perpendicular
to the floor.
level
Undefoounter compactor tools;
screwdriver _ pliers
_o 5/16" box_;;;;;;;_
r wrench
• level floor front to back. If floor at
front of opening is not level with floor at _rs _giovn
rear of opening, shims may be needed _ ,,
to level compactor..
• 6 inches (15.2 cm) of clearance to le_ : _ ruler or
I_) measuringtape
the right side of compactor to be able ._
to remove bag.
• 23 inches (58.4 cm) in front of P_ requured for undercoun_ :
compactor to remove drawer. Ur_unter Bracket Kit, Part__.,_
987_18
34-1/8"
(86.7 cm)
14-15/16" 24"
(..0 cm)
To Next Page
Loading...
Need help?
General
