Kenwood 1050SW User Manual

Specifications
Amplifier
Power output
Phase switching
Input sensitivity and input impedance
RCA-type jack
Push-type terminals
Supply voltage
Rated power consumption
Speaker
Enclosure
Speaker units
Nominal impedance
Width
Height
Depth
Net weight
|OS5OSW
150 watts RMS into 4 ohms,
from 20 Hz to 200 Hz, with no
more than 0.09% total
harmonic distortion
Normal, Reverse
70 mV (12 k-ohms)
1.7 V (15 k-ohms)
AC I10V ~ 120 V
150 watts
Ported
12 in (300 mm) polypropylene
cone
4 ohms
14.3 in (363 mm)
21.7 in (550 mm)
18.9 in (480 mm) with grille
53 Ib (24 kg)
|O3SW
100 watts RMS into 4 ohms,
from 20 Hz to 200 Hz, with no
more than 0.09% total
harmonic distortion
Normal, Reverse
70 mV (12 k-ohms)
1.7 V (15 k-ohms)
AC 110 V ~ 120 V
1 10 watts
Ported
10 in (250 mm) paper laminate
cone
4 ohms
11.8 in (300 mm)
18.9 in (480 mm)
15.6 in (395 mm)
40 Ib (18 kg)
Since Kenwood follows a policy of continuous advancement in development, these specifications
may change without notice.
KENWOOD USA CORPORATION
PO Box 22745
Long Beach, California 90801-5745
www .kenwoodusa.com
KENWOOD ELECTRONICS CANADA, INC.
6070 Kestrel Road
Mississauga, Ontario, Canada LST |S8
© 1997 Kenwood USA Corporation. All rights reserved.
Derechos de autor, © 1997 Kenwood USA Corporation. Se reservan todos los derechos
© 1997 Kenwood USA Corporation. Tous droits réservés.
B61 -0886-00

Kenwood 1050SW Specifications