Kenwood 1060VR User Manual

SOURCE DIRECT playback
41070VR/1080VR (En/K)
Use this function to pass the source material direct to the amplifier, bypassing any audio processing.
@ Select a playback source.
INPUT SELECTOR
(C)
@ Press the SOURCE DIRECT key.
SUUMLE LIKELI
%
© Start playback .
* Tone controls do not work during SOURCE DIRECT playback.
* Pressing the STEREO key or any of the keys related to surround
playback will cance! SOURCE DIRECT playback
To cancel
Press again.
Goes out
lf SOURCF DIRFCT playback was activated when using a surround
mode, cancelling it reactivates the previous surround mode.
Listening with headphones
@ Turn OFF both speaker switches.
A SPEAKERS B
@ Connect headphones.
proves
© Adjust the volume.
VOLUME CONTROL
Down’ ‘up
Decrease volurne Increase volume
Make sure the SPEAKERS indicators are turned off.
¢ Turning off both SPEAKERS A and B when using a surround mode will
cancel the respective mode and activate stereo playback.

Kenwood 1060VR Specifications

General

Brand	Kenwood
Model	1060VR
Category	Stereo Receiver
Language	English