CDE/CME/CDEE-BA-e-1014
22
8.4 Description of individual functions
8.4.1 Weighing units (Unit)
Ö With the weighing scale switched off, press the ON/OFF- and TARE-key
simultaneously until “Unit“ appears.
Ö Conform by pressing the PRINT-key; the currently set weighing unit appears.
Ö Use the 10x-button to select between the different units (see table).
Ö By pressing the PRINT button the selected weighing unit is taken over.
Display Conversion factor
1 g =
Gram g 1.
Pound lb 0.0022046226
Ounce oz 0.035273962
Troy ounce ozt 0.032150747
Tael Hongkong tlh 0.02671725
Tael Taiwan tlt 0.0266666
Grain gn 15.43235835
Pennyweight dwt 0.643014931
Momme (mom) 0.2667
Tola tol 0.0857333381
Carat ct 5
Freely selectable factor *) FFA xx.xx
*)
In order to enter an own conversion factor, press the 10x-button as explained above
until „FFA“ is displayed. Confirm by pressing the PRINT key The last digit begins to
flash. Using the 20x-button, the displayed value is increased by 1, with the 5x-button
it is reduced by 1. Use the TARE button to jump one digit to the left. When all the
changes are ready, use the PRINT button to save this value and by pressing the
PRINT button the „Freely selectable factor“ is taken over as current weighing unit.
To Next Page
Loading...
Need help?
General
