KERN CME 100-3 User Manual

CDE/CME/CDEE-BA-e-1014
25
8.4.4 Selection of the adjustment weight
For the model ranges KERN CDE and CME the adjustment weight can be selected
from three or four preset nominal values (c.1/3; 2/3; max or c.1/4; 1/2; 3/4; max) (see
also table 1 below, default settings are highlighted in grey). In order to achieve high-
quality weighing results in the sense of the measuring technology, it is recommended
to select the nominal value as high as possible.
Ö With the weighing scale switched off, press ON/OFF and TARE-key
simultaneously until the first function “Unit“ appears.
Ö Repeatedly press the 10x-key until “CAL“ appears.
Ö Confirm by pressing the PRINT-key. Current setting appears.
Ö Use the 10x-key, to select among the preset nominal values (see
tab. 1)
Ö Confirm your selected setting by pressing the PRINT-key.
CME 100-3 CME 300-2 CME 1000-2 CME 3000-1 CME 6000-1
20 g 100 g 200 kg 1 kg 2 kg
50 g 200 g 500 kg 2 kg 5 kg
100 g 300 g 1000 kg 3 kg 6 kg
CDE 35K1 CDE 35K1L CDE 60K2 CDE 60K2L CDE 150K5 CDE 150K5L
5 kg 5 kg
10 kg 10 kg 20 kg 20 kg 50 kg 50 kg
20 kg 20 kg 40 kg 40 kg 100 kg 100 kg
30 kg 30 kg 60 kg 60 kg 150 kg 150 kg
8.4.5 Reset to factory setting
With this function the manual changes of the menu settings are reset to factory
setting.
Ö With the weighing scale switched off, press ON/OFF and TARE-key
simultaneously until the first function “Unit“ appears.
Ö Repeatedly press the 10x-key until “rSt“ appears.
Ö Confirm by pressing the PRINT-key. Current setting appears.
Ö Now you can use the 10x-key to select among the settings below:
„rSt no“: No reset to default setting
„rSt yes“: Reset to default setting
Ö Confirm your selected setting by pressing the PRINT-key.

KERN CME 100-3 Specifications

General

Brand	KERN
Model	CME 100-3
Category	Scales
Language	English