MPE_HNM / MPE_PNM -SH-e-1810 3
1 Basic Information
The device must be repaired only by trained specialist staff or personnel with
professional formation (such as a repair-specialist accredited by law concerning
verification). The service manual is obligatory for repair work. After repair, original
conditions of the device have to be restored. Only original spare parts should be
used.
Instructions about conformity-evaluated scales:
Repair must be carried only at 100% compliance with the type approval. A violation
of this specification will result in a loss of the type approval! After successful repair
the balance will have to be reverified before it can be used again in a statutorily
regulated field.
The operation and configuration of each scale is described in the accompanying
manual of the scale. Any safety information in respect for verification are also
described in the accompanying manual
This service manual covers the MPE_HNM / MPE_PNM series and is edited for the
authorized servicing personnel.
Note all rights are reserved. Copying any part of this manual is prohibited without our
permission.
For operation, please use the operating instructions corresponding to the device
To Next Page
Loading...
Need help?
General
