MPE_HNM / MPE_PNM -SH-e-1810 9
4.4 Battery operation
As an alternative to rechargeable battery operation, the balance may also be
operated with 6x AA batteries.
Open battery compartment cover (1) at the lower side of the display unit and insert
batteries according to the example below. Lock the battery cover again. If the
batteries are empty, in the balance display appears the symbol .
Change batteries. To save battery power, the balance switches off automatically
(see operating instructions corresponding to the device chap.11.6 Auto off).
Capacity of batteries exhausted.
Batteries will soon be flat.
Batteries are completely charged
4.5 Insert batteries
Remove battery compartment cover
Connect battery holder to housing
contact acc. to illustration
Insert batteries into battery compartment
and lock with battery compartment
cover.
To Next Page
Loading...
Need help?
General
