Key Automation TURBO SC122 User Manual

13
EN
TECHNICAL DATA
MODEL SC120 SC122 SC122M TU11224
Speed* cm/s 16 16 16 20
Torque Nm 40 40 40 38
Working cycle % 30 30 30 80
Control unit - CT102B CT102B CT10224
Power Vac (Vdc) 230 230 230 230 (24)
Motor consumption
A 2,6 2,6 2,6 1,3
Consumption power W 600 600 600 300
Capacitor µF 20 20 20 -
Thermoprotection °C 150 150 150 -
Protection degree IP 44 44 44 44
Dimension (L - P- H) mm 320 - 184 - 260 320 - 184 - 260 320 - 184 - 260 320 - 184 - 260
Weight Kg 13,5 13,5 13,5 11
Working temperature °C -20 +55 -20 +55 -20 +55 -20 +55
Max gate weight Kg 1200 1200 1200 1100
Sound emission level dB(A) ≤ 70 ≤ 70 ≤ 70 ≤ 70
TECHNICAL DATA
MODEL SC162
Speed* cm/s 16
Torque Nm 40
Working cycle % 30
Control unit CT102B
Power Vac (Vdc) 230
Motor consumption
A 3
Consumption power W 700
Capacitor µF 20
Thermoprotection °C 150
Protection degree IP 44
Dimension (L - P- H) mm 320 - 184 - 260
Weight Kg 14,5
Working temperature °C -20 +55
Max gate weight Kg 1600
Sound emission level
dB(A) ≤ 70
* Variable data according to gate weight
Before installing this product, verify and check the following steps:
- Check that the gate or door are suitable for automation
- The weight and size of the gate or door must be within the
maximum permissible operating limits specied in Fig. 2
- Check the presence and strength of the security mechanical
stops of the gate or door
- Check that the mounting area of the product is not subject to
ooding
- Conditions of high acidity or salinity or proximity to heat sources
could cause malfunction of the product
- Extreme weather conditions (for example the presence of snow,
ice, high temperature range, high temperatures) may increase the
friction and therefore the force required for the handling and initial
starting point may be higher than under normal conditions.
- Check that the manual operation of gate or door is smooth and
friction-free and there is no risk of derailment of the same
- Check that the gate or door are in equilibrium and stationary if
left in any position
- Check that the power line to supply the product is equipped with
proper grounding safety and protected by a magnetothermal and
di󰀨erential security device
- Provide the power system with a disconnecting device with a
gap of contacts enabling full disconnection under the conditions
dictated by the overvoltage category III.
- Ensure that all materials used for the installation comply with
current regulations
3 - PRELIMINARY CHECKS

Key Automation TURBO SC122 Specifications

General

Brand	Key Automation
Model	TURBO SC122
Category	Garage Door Opener
Language	English