M56O725A
M56O753A
(1) Power Steering Oil Line
1. Check to see that all hydraulic
lines and hose ttings are tight and
undamaged.
2. If damage is found you should re-
place the hose at once.
(1) Lock Nut (2) Adjusting Bolt
If the front axle pivot pin adjustment
is not correct, front wheel vibration
can occur causing vibration in the
steering wheel
ADJUSTING PROCEDURE
Loosen the lock nut, tighten the ad-
justing screw all the way, and then
loosen the screw by 1/6 turn. Re-
tighten the lock nut.
This service should be performed by
your authorized KIOTI dealer.
ADJUSTING ENGINE VALVE CLEAR-
To Next Page
Loading...
Need help?
General
