SWITCH
SWITCH MOUNTING LOCATION
(1) Instrument Panel (2) Combination Switch (3) Hazard Lamp Switch (4) Key Switch
KEY SWITCH
(1) Key switch (A) Pre-heat (B) OFF
(C) ACC (D) ON (E) Start
• Pre-heat (A)
The position "A" indicates the
"manual preheat". This position is a
self-return type, so the key should
be held there while preheating.
The pre-heating indication lamp on
the dash board will turn on at the
same time. Pre-heating more than
30 seconds consecutively can re-
duce the preheat system’s life.
M56O404A
M56O468A