ļ¬ī
Make sure that the coupling
device of brake pedal and dif-
ferential lock pedal is released.
ļ¬ī
Do not disengage the clutch or
put the shift lever in the neu-
tral position on a slope. Other-
wise, the tractor may become
inoperable.
ļ¬ī
Before entering a steep slope,
move the shift lever down to
a proper gear and never try
to move the shift lever on a
slope. A serious accident can
occur.
WARNING
THE CAUTIONS WHEN COMING
IN AND OUT OF PAVED ROAD
1. Make sure that the left and right
pedal are connected.
2. Go in and out of the cultivated land
at a right angle.
3. Enter and exit the īæeld by driving
the tractor at a right angle to the
bank.
4. When going up, lower the imple-
ment not to let the front wheel rise.
Raise the implement as soon as
C56O502A
DRIVING ON SLOPE
1. Please drive according to the con-
ditions of the slope at safe speed
so that the engine is not under
heavy load if possible.
2. Make sure to shift to the lower
gear in order to prevent the engine
from stalling on an uphill.
3. On the downhill slope, drive at the
low speed.
ļ¬ī
"Unlike a gas pedal, these HST
pedals act like a main speed
shift in a mechanical tractor".
Therefore, depress them deep-
er to obtain higher speed with
lower torque and release them
to obtain lower speed with
higher torque.
ļ¬ī
For heavy load job, such as
front end loader operation, use
low or medium speed of the
range shift lever.
IMPORTANT
To Next Page
Loading...
Need help?
General
