EasyManuals Logo
Home>Kipor>Inverter>KDE75SS3

Kipor KDE75SS3 User Manual

Kipor KDE75SS3
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
21
5. FUEL, LUBRICANT, COOLING WATER, BATTERY
5.1 Fuel
Attended operation
Only designated fuel is allowed. Otherwise it is impossible to take full use of engine performance
even leads to errors. Choose the fuel type according to the temperature condition.
Applicable for the international diesel standard.
GB/T252-1994 light diesel 0# in summer, -10# , -20#, -30# in winter
1) Fuel type and air temperature
Fuel type is classified according to the solidifying point. Select the fuel type on the basis of
following conditions and with reference to outside temperature.
Diesel type
Ambient
temperature
GB/T252-1994 JISK2204
-5 or above -10# 2#
-15 or above -20#
-25 or above -30#
3#
2) Use of fuel
a. Fuel with water or foreign matters may cause bad working.
b. Store the fuel in the clean container
c. Container shall be protected against rainwater or other foreign matters.
d. Do not move the fuel container and keep it static for several hours. Then water and foreign
matters contained in the fuel deposit at the bottom.
Only use clear and clean fuel upper with pump.
(1) It will be penalized for using heavy oil, kerosene, light mixed fuel, or other fuel. Make sure use
light oil.
If use other fuel, or water, dirty mixed fuel, the engine performance might decline, resulting in
serious troubleshooting.
(2) Fill the proper fuel. Improper fuel may lead to risk of fire. Please confirm the type of fuel in
advance.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kipor KDE75SS3 and is the answer not in the manual?

Kipor KDE75SS3 Specifications

General IconGeneral
BrandKipor
ModelKDE75SS3
CategoryInverter
LanguageEnglish

Related product manuals