29
6.3 Running
Following parts in the running generator are extremely dangerous, such as radiator fan, belt,
engine, cylinder hood, exhaust pipe, muffle and other parts at high temperature and high voltage.
● Close the side door of running machine.
● Stop running machine before check and maintenance.
Run the machine with all instruments on the operation panel.
6.3.1 Pre-start checks
Carry on following checks prior to each start.
1) Remove foreign matters in the generator
● Check if there is any tool or rag in the generator.
● Check if there is any rubbish or inflammable matter around muffle or engine. If any, remove
it away immediately.
● Check if suction inlet and exhaust vent of generator is jammed by rubbish or rag. If any,
remove it away immediately.
2) Check in the generator
● Any oil leakage in the engine
● Any fuel leakage in the fuel system
● Any water leakage in cooling water system
● Broken distribution line, short circuit or loose joint
● Check if any screw is loose or released
Do not run the machine before eliminating any founded abnormality.
3) Check and fill fuel
Regularly check rest fuel level in the fuel tank and add recommended fuel on time (refer to 6.1.1).
4) Check and fill lubricant
To Next Page
Loading...
Need help?
General
