32
kobalttools.com
*Some materials mentioned in this section are sold separately.
HOW TO MAKE A PUSH STICK
• In order to operate your table saw safely, you must use a push stick whenever the size or shape of
the workpiece would otherwise cause your hands to be within 6 in. (152 mm) of the saw blade or
other cutter. A push stick is included with this saw.
• No special wood is needed to make additional push-sticks as long as it’s sturdy and long enough. A
length of 15.7 in. (400 mm) is recommended with a notch that ts against the edge of the workpiece
to prevent slipping. It’s a good idea to have several push sticks of the same length [15.7 in. (400
mm)] with dierent size notches for dierent workpiece thicknesses.
• The shape can vary to suit your own needs as long as it performs its intended function of keeping
your hands away from the blade.
BEFORE OPERATING
To Next Page
Loading...
Need help?
General