17
• Before cleaning your projector, make sure that it is switched o and unplugged.
• Wipe the projector’s housing using a clean dry cloth.
• Make sure that the lens is cool before cleaning it. Wipe it gently using a lens cleaning paper or cloth.
Never touch the lens with bare hands.
• Do not clean the projector with liquid or aerosol cleaners, or any harsh or abrasive chemicals
• Do not submerge this product in water or any other liquid.
• Never operate the projector immediately after moving it to a cold location. When exposed to a
drastic temperature change, moisture may condense on the lens and other internal parts, resulting
in damage to the projector. It is recommended to wait at least 2 hours after exposing the projector to
drastic temperature changes.
Q Why is the projector’s blue indicator on, but the projection screen has not yet turned on?
A Make sure not to press and hold the power key too long. Release the power key as soon as the blue
indicator is on. Please be patient and not push the power key repeatedly while the projector system
is booting. Otherwise this may cause the projector to become stuck.
Q Why can I not play the iles from my microSD™ card?
A Please check:
a. If the capacity of this microSD™ card is higher than 64GB. The capacity supported by the
projector is only up to 64GB.
b. If the microSD™ card is not standard compliant.
Q Why can some movies not be played?
A In this case, there are several possibilities:
a. The ile size is too large.
b. The video resolution is higher than 1080p. The supported resolution is only up to 1080p.
c. The ile format is not supported. Please refer to the video format support list in the
speciications section.
Q Why is my movie not playing sound?
A Due to the copyright issue of Dolby®, this projector does not support Dolby® audio decoding. You
might not get sound from videos if they use Dolby® audio decoding.
7. CARE AND MAINTENANCE
8. TROUBLESHOOTING
To Next Page
Loading...
Need help?
General