To Next Page

To Previous Page

TP-7044 6/23 21

2.9 Controller Features

The controller features include the annunciator lamp, graphical display and pushbutton/rotary selector dial, switches and

controls, and terminal blocks. See Figure 8 for an illustration of the controller front panel. The following paragraphs detail the

features by general topics. The controller provides:

• The backlit LCD (liquid crystal display) for monitoring the generator set functions and output values

• Master control buttons with status lights

• Fault lamp

• Pushbutton/rotary selector dial to navigate the generator set displays

• Alarm horn and alarm silence switch/light

• Mini USB connector for PC setup using SiteTech™ software

The controller features, accessories, and menu displays depend upon the engine electronic control module (ECM) setup and

features. Controller features apply to generator set models with ECM and non-ECM engines unless otherwise noted.

Figure 8 Decision-Maker

3500 Controller with Digital Display and Pushbutton/Rotary Selector Dial

Note:

Press the pushbutton/rotary selector dial to turn on the controller lights and display. The backlight turns off 60 minutes after the

last entry when in the AUTO mode.

Note:

After about 5 minutes of no user input (pushbutton/rotary selector dial or buttons), the menu is reset to the top of the main menus

and auto-paging activates for the Overview submenus.

Note:

Measurements display in metric or English units. Use the Controller Configuration menu to change the measurement display.

Emergency stop switch

Graphical display

Annunciator fault lamp

Alarm horn (interior, located

behind controller face)

Pushbutton/rotary

selector dial

Mini USB connection

Generator set master control, OFF/RESET-AUTO-RUN

buttons with lamps

Alarm silence button with lamp (press and hold

for 3 seconds for lamp test)

Kohler 14EKOZD User Manual

Other manuals for Kohler 14EKOZD