METHOD FOR STEERING MACHINE
WARNING
• Avoid turning on a slope whenever possible, since sideways slip occurs easily.
T
ake care particularly on soft ground or clay land.
• Do not make a pivot turn at a high speed.
METHOD FOR NORMAL TURNING OPERATION
During travel, tilt joystick (steering, directional and gear shift
lever) (1) in a direction you want to turn.
The machine turns in a direction in which joystick (steering, di-
rectional and gear shift lever) (1) is tilted.
METHOD FOR TURNING THE MACHINE WHILE TRAVELING FORWARD
When gradually turning to the left, tilt the joystick (steering, di-
rectional and gear shift lever) forward and tilt it to left (L) half-
way.
Any turning radius can be set until the operating effort of joy-
stick (steering, directional and gear shift lever) becomes large.
REMARK
When gradually turning to the right, tilt the joystick (steering, di-
rectional and gear shift lever) forward and tilt it to right halfway.
Operate similarly during reverse travel.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-208
To Next Page
Loading...
Need help?
General
