SAFETY PRECAUTIONS FOR MAINTENENCE
2-27
PRECAUTIONS FOR MAINTENENCE
WARNING TAG
● Always attach the "DO NOT OPERATE" warning tag to the
work equipment control lever in the operator's cab to alert
others that you are performing service or maintenance on
the machine. Attach additional warning tags around the
machine if necessary.
Warning tag Part No. 09963-03001
Keep this warning tag in the tool box while it is not used. If
there is not the tool box, keep the tag in the operation man-
ual pocket.
● If others start the engine, or touch or operate the work
equipment control lever while you are performing service
or maintenance, you could suffer serious injury or property
damage.
KEEP WORK PLACE CLEAN AND TIDY
Do not leave hammers or other tools lying around in the work place. Wipe up all grease, oil, or other substances
that will cause you to slip. Always keep the work place clean the tidy to enable you to carry out operations safely. If
the work place is not kept claen and tidy, there is the danger that you will trip, slip, or fall over and injure yourself.
APPOINT LEADER WHEN WORKING WITH OTHERS
When repairing the machine or when removing and installing the work equipment, appoint a leader and follow his
instructions during the operation.
When working with others, misunderstandings between workers can lead to serious accidents.
To Next Page
Need help?
General
