2-68
12. OPERATION
AE61743B
PARKING
TRAVEL
12.4 MOVING MACHINE OFF
WARNING
When moving off, check that the area around the machine is
safe, and sound the horn before moving.
Do not allow anyone in the area around the machine.
There is a blind spot behind the machine, so use extreme care
when reversing the machine.
1. Check that there is no warning display on the machine monitor.
2. Check that your seat belt is fastened and that dump lever 1 is
at the FLOAT position.
3. Depress the brake pedal fully. Check that air pressure gauge 2
is in the green range, then set parking brake lever 3 to the
TRAVEL position to release the parking brake.
4. Check that retarder pilot lamp 4 has gone out, then set shift
lever 5 to the desired position.
NOTICE
‡ When operating the shift lever, be sure to set it in position
securely.
If the lever is not placed in position properly, the shift position
display on the panel may go out and the transmission warning
monitor lamp may light up.
‡ Always release the accelerator pedal before shifting from to R
or F.
To Next Page
Loading...
Need help?
General
