3 Unpack the optional tray, and then remove all packing material.
Note: If optional trays are already installed, then unlock them from the printer before lifting the printer. Do
not try to lift the printer and trays at the same time.
4 Align the printer with the optional tray, and then lower the printer until it clicks into place.
CAUTION—POTENTIAL INJURY: If the printer weight is greater than 18 kg (40 lb), then it requires
two or more trained personnel to lift it safely.
5 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
6 Turn on the printer.
Add the tray in the print driver to make it available for print jobs. For more information, see
“Adding available
options in the print driver” on page 213.
Software
Supported operating systems
Using the Drivers CD, you can install the printer software on the following operating systems:
• Windows 8.1
• Windows Server 2012 R2
• Windows Server 2012
• Windows 7 SP1
• Windows Server 2008 R2 SP1
• Windows Server 2008 SP2
• Windows 10
Upgrading and migrating 211
To Next Page
Loading...
Need help?
General
