C253/C203 2-10
Administrator Operations
2
2.3 Setting the External Server
When access to the Administrator of the machine by the Administrator Settings via the control panel is au-
thenticated, the machine enables setting of the External Server.
The External Server that can be used for authentication is Active Directory only. Operate the machine in Ac-
tive Directory.
2.3.1 Setting the External Server
2
Note
Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
A Sever Name that already exists cannot be redundantly registered.
<Setting can be made only from the control panel>
0 For the procedure to call the Administrator Settings to the display, see "Accessing the Administrator
Settings" on page 2-2.
1 Call the Administrator Settings to the screen from the control panel.
2 Touch [User Authentication/Account Track].
3 Touch [External Sever Settings].
4 Touch the specific Sever Registration key, in which no sever has been registered.
5 Touch [New].
?
What steps should be followed to change or delete a server previously registered?
% To change or delete a previously registered server, touch [Edit] or [Delete].
To Next Page
Loading...
Need help?
General
