C253/C203 2-20
Administrator Operations
2
5 Touch [OK].
?
What happens if the HDD Lock Password entered does not meet the requirements of the Password
Rules?
% If the HDD Lock Password entered does not comply with the Password Rules, a message appears
that tells that the HDD Lock Password entered cannot be used. Enter the correct HDD Lock Pass-
word. For details of the Password Rules, see "Password Rules" on page 1-8.
% To change the HDD Lock Password, see "Changing the HDD Lock Password" on page 2-21.
6 To prevent entry of a wrong password, enter the 20-digit HDD Lock Password once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Settings screen.
7 Touch [OK].
?
What happens if there is a mismatch in the HDD Lock Passwords?
% If there is a mismatch in the HDD Lock Passwords, a message appears that tells that there is a mis-
match in the HDD Lock Passwords. Perform steps 4 through 7 once again.
8 Make sure that a message appears prompting you to turn OFF and then ON the main power switch.
Now, turn OFF and then turn ON the main power switch.
2
Note
NEVER forget the HDD Lock Password set through the above procedure. The HDD Lock Password
must be entered when changing canceling the HDD Lock Password.
To Next Page
Loading...
Need help?
General
