Konica Minolta bizhub C253 User Manual

C253/C203 2-31
Administrator Operations
2
4 Enter the new 20-digit Encryption Key from the keyboard and keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Settings screen.
5 Touch [OK].
?
What happens if the Encryption Key entered does not meet the requirements of the Password
Rules?
% If the Encryption Key entered does not comply with the Password Rules, a message appears that
tells that the Encryption Key entered cannot be used. Enter the correct Encryption Key. For details
of the Password Rules, see "Password Rules" on page 1-8.
6 To prevent entry of a wrong Encryption Key, enter the 20-digit Encryption Key once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Settings screen.
7 Touch [OK].
?
What if there is a mismatch in the Encryption Keys?
% If there is a mismatch in the Encryption Keys, a message appears that tells that there is a mismatch
in the Encryption Keys. Perform steps 4 through 7 once again.

Konica Minolta bizhub C253 Specifications

General

Category	All in One Printer
Printing Technology	Laser
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Standard Memory	1 GB
Hard Drive	80 GB
Print Speed	25 ppm
Copy Speed	25 cpm
Scan Speed	Up to 70 opm
Supported Paper Sizes	A3, A4, A5, B4, B5
Scanner Type	Flatbed, ADF
Connectivity	USB, Ethernet
Standard Paper Capacity	1, 150 sheets