bizhub C257i 9-5
9.1 Main messages and remedies
9
Return the original or paper, and tap [OK] or [Complete]; the system restarts scanning or printing of the orig-
inal.
9.1.3 When an error message appears
When an error is detected, the following message appears. Take the appropriate action according to the
message displayed on the screen. If you cannot resolve the error, write down the [Trouble Code], and contact
your service representative with the power plug disconnected from the power outlet.
In normal circumstances, the phone number and fax number for your service representative appear in the
center of the screen.
NOTICE
If a defective part can be separated in order to be able to continue operations after a problem has been de-
tected, [Continue] or [Recover Data] is displayed. To continue operations, select any key. However, the prob-
lem has not been resolved, so contact your service representative immediately.
Item Description
[Start Guidance] Starts the guidance showing how to clear a paper/staple jam.
[Display Switch] Changes the screen that shows the paper jam clearing procedure and the
screen that shows where the paper jam occurred.
Number (indicating the
location number for the
section with a pa-
per/staple jam)
A section chart is displayed with a location number enclosed in a circle for a
section where a paper/staple jam has occurred.
To Next Page
Loading...
Need help?
General
