Konica Minolta bizhub C3350i User Manual

Upgrading and migrating
Hardware
Available internal options
• User Flash
• Font cards
• Firmware cards
– Bar Code
– IPDS
• Printer hard disk
Accessing the controller board
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet, and then from the printer.
3 Using a flat-head screwdriver, open the controller board access cover.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board components or
connectors.
Upgrading and migrating 206

Konica Minolta bizhub C3350i Specifications

General

Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Monthly Duty Cycle	120, 000 pages
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Display	7-inch color touch panel
Mobile Printing	AirPrint, Mopria, Google Cloud Print
Print Speed	33 ppm
Connectivity	Ethernet, USB, Wi-Fi
Supported Paper Sizes	A4
Fax Memory	Up to 500 jobs
Memory	4 GB
Interface	10/100/1000Base-T Ethernet, USB 2.0, Wi-Fi
Dimensions (W x D x H)	420 x 528 x 473 mm