bizhub C658/C558/C458/C368/C308/C258 4-9
4.2 Using the Web browser function
4
Advanced Functions Chapter 4
4.2 Using the Web browser function
4.2.1 Required settings and procedures
The Web browser can be used on the Touch Panel of this machine.
This section describes how to display and print a Web page on the Touch Panel of this machine.
- Check that this machine can be connected to the Internet.
- When enabling the Web browser function via the Internet, connect this machine to the License Man-
agement Server (LMS) through the proxy server used for remote diagnosis. For details on configuring
the proxy server used for remote diagnosis, refer to the User's Guide CD.
- To use the Web browser, administrator settings are required in advance.
Preparation flow
The following describes a preparation flow to use the Web browser function. For details, refer to the relevant
page.
This preparation is not required the second time or subsequent times.
1 Enabling the Web browser function (Administrator)
% Enable the Web browser function on this machine. For details, refer to page 4-10.
% If you cannot enable the Web browser above, proceed to steps 2 and 3.
2 Registering the license (Administrator)
% Register the license on a dedicated Web site. For details, refer to page 4-11.
3 Enabling the Web browser using the license (Administrator)
% Enter the license code to enable the function. For details, refer to page 4-12.
Operation flow
The following describes an operation flow. For details, refer to the relevant page.
1 Starting the Web browser
% For details, refer to page 4-16.
2 Displaying Web pages
% For details, refer to page 4-17.
3 Printing the currently displayed page or the linked file
% For details, refer to page 4-18.
To Next Page
Loading...
Need help?
General
