Touch Panel
2
2-36 bizhub C554e/C454e/C364e/C284e/C224e
2.6
Precautions on using the Touch panel
This machine features a capacitance-base touch panel. Note the following points when operating the Touch
Panel.
- Use your finger or the Stylus Pen supplied with this machine. Note that the Touch Panel will not re-
spond appropriately if you operate it using your nail or a pen tip instead of your finger or the Stylus Pen.
- Applying a strong force to the Touch Panel will damage the Touch Panel, and potentially cause a
breakage.
- When operating in the Touch Panel, do not press on it using excessive force or with a pointed object
such as a mechanical pencil.
- The Touch Panel may not respond appropriately, if operated with a wet finger.
- The Touch Panel will not respond appropriately, if operated with hands with gloves on. It is recom-
mended that you use the Stylus Pen supplied with this machine or your finger.
- The Touch Panel may not respond appropriately, if the distance between you and a fluorescent lamp
is 20 inches (50 cm) or less while you are operating the Touch Panel.
- Avoid using the Touch Panel at a site near a device that generates electric noise (such as a generator
and an air conditioner). The electric noise may cause the Touch Panel to operate erratically.
2.6.3 How to display the keypad
When tapping the input area on the copy screen and etc. for entering the number of copies or entering ad-
justment values, the Keypad will be displayed.
It can also be displayed by pressing the 10keypad provided for the Register key.
Input area for entering the number of copies
Input area for entering values
To Next Page
Loading...
Need help?
General
