EasyManuals Logo
Home>Konica Minolta>Digital Camera>DiMAGE X1

Konica Minolta DiMAGE X1 User Manual

Konica Minolta DiMAGE X1
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
5756 Recording - advanced operation
DATE IMPRINTING
The date and time of recording can be printed directly on a still
image. The imprinting function must be activated before the image
is taken. Once activated, the date will continue to be imprinted
until the function is reset; a yellow bar is displayed behind the
frame counter on the monitor to indicate the imprinting function is
active.
Date imprinting is activated with section 3 of the recording menu
(p. 38). Date imprinting has two menu options. The YYYY/MM/DD
option prints the date. The MM/DD/hr:min option prints the month,
day, and time of recording.
The date and time are imprinted in the lower right corner of the
image when viewed horizontally. It is printed directly on the photo-
graph writing over the image information. The date can be imprint-
ed in three formats: year / month / day, month / day / year, and
day / month / year. The date and date format are set in section 3
of the setup menu (p. 73).
Date-imprinting indicator
In the recording mode, a function can be assigned to the up/down
or left/right keys of the controller. This function is specified in sec-
tion 4 of the recording menu (p. 38). This function cannot be used
with the digital subject programs. Refer to the following sections
for information on drive modes (p. 40), exposure compensation (p.
50), white balance (p. 46), and camera sensitivity (p. 48).
CUSTOM KEY FUNCTION
Key func.
Exp. comp.
Drive mode
Sensitivity
Off
Key func.
White balance
In the recording mode, use the up/down or left/right keys of
the controller to change the function set with the menu.
The LCD monitor displays the settings as they are changed.
The changes are visible in the monitor image. The function
is set automatically after five seconds or when another
camera button is pressed.
The date and time of recording can be viewed with the camera in the playback mode, or on a
computer with DiMAGE Master Lite. This software is provided on the Digital Camera Software
CD-ROM included with the camera.
Camera Notes

Table of Contents

Other manuals for Konica Minolta DiMAGE X1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Konica Minolta DiMAGE X1 and is the answer not in the manual?

Konica Minolta DiMAGE X1 Specifications

General IconGeneral
BrandKonica Minolta
ModelDiMAGE X1
CategoryDigital Camera
LanguageEnglish

Related product manuals