To Next Page

To Previous Page

9796 Data-transfer mode

NAVIGATING THE PICTBRIDGE MENU

Press the center button of the controller to select the highlighted setting.

Use the left/right keys of the controller to highlight the appropriate menu tab; the menu

changes as the tabs are highlighted.

Use the up/down keys to scroll through the menu options. Highlight the option whose

setting needs to be changed.

With the menu option highlighted, press the right controller key; the settings are dis-

played with the current setting highlighted. If “Start” or “Enter” is displayed, press the

center button of the controller to continue.

Use the up/down keys to highlight the new setting.

Once a setting has been selected, the cursor returns to the menu options and the new setting is

displayed. To return to the PictBridge screen, press the menu button. Read the following sections

on information on the menu options.

Pressing the menu button (1) turns the menu on and off. The four-way

keys of the controller (2) move the cursor in the menu. Pressing the

center button of the controller enters a setting. The options that can be

changed vary with the printer.

Activate the menu with the menu button.

Batch print

Index print

–

Batch print

Index print

An index print of all still images on the memory card can be made. The quality and size of the print

can be specified with the camera menu. The number of images per page varies with the printer. The

print-setup confirmation screen is displayed before the print routine starts.

Batch print in section 1 selects all still images on the memory card for printing. Two options are

available:

All-frames - to print all images on the card. A screen opens so the number of copies of each image

can be specified. A maximum number of twenty copies and up to fifty images in total can be print-

ed.

Reset - to cancel changes made with the batch print option or with the print selection screen.

Konica Minolta DiMAGE X1 User Manual

Other manuals for Konica Minolta DiMAGE X1