24 RECORDING - BASIC OPERATION
LCD MONITOR DISPLAY - BASIC
If the shutter speed falls below the point where the camera can
be hand held safely, the camera-shake warning indicator will
appear on the monitor. Camera shake is slight blurring caused
by subtle hand motion and is more pronounced at the
telephoto position of the lens than at the wide-angle position.
Although the warning appears, the shutter can still be released.
If the warning appears, place the camera on a tripod or use the
built-in flash.
CAMERA-SHAKE WARNING
Image quality (p. 45)
Drive mode (p. 40)
Frame counter (p. 46)
Focus signal (p. 27)
Recording mode
Flash mode (p. 38)
Camera-shake warning (p. 24)
Focus frame
LCD monitor
Battery-condition indicator (p. 15)
To Next Page
Loading...
Need help?
General
