Kramer TP-581T User Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-581T, TP-582T and TP-582R
10
5.2 Connecting the TP-582R
To connect the TP-582R as shown in the example in Figure 4, do the
following:
1. Connect the HDMI OUT 1 connector to the first HDMI acceptor (for
example, LCD display 1).
2. Connect the HDMI OUT 2 connector to the first HDMI acceptor (for
example, LCD display 2).
3. Connect the ETHERNET RJ-45 connector to a network.
4. Connect the RS-232 9-pin D-sub connector to an RS-232 port (for
example, a projector).
5. Connect the IR 3.5mm mini jack to an IR sensor.
6. Connect S/PDIF RCA connector to a digital audio acceptor (for
example, a digital audio recorder).
7. Connect TOSLINK
®
connector to an optical audio acceptor (for
example, a digital audio recorder) (not shown in Figure 4).
8. Connect the LINE IN RJ-45 connector over CAT 5 twisted pair to the
TP-581T or TP-582T LINE OUT connector.
9. If required, acquire the EDID (see Section 5.6).
10. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 4).

Kramer TP-581T Specifications

General

Brand	Kramer
Model	TP-581T
Category	Receiver
Language	English