Safety
14
Pos: 32 /Übersc hriften/Übersc hriften 2/K-O/Lag e der Sicherh eitsaufkleber a n der Maschi ne @ 0\mod_119 5634967326_ 78.doc @ 102 0
4.2 Position of the Adhesive Safety Stickers on the Machine
Pos: 33 /BA/Sic herheit/Aufkleber/ Schwader/Sic herheitsaufkle ber Schwad er 46T US @ 8\ mod_12193858 32580_78.d oc @ 117066
GL
SW46T005_2
5
4
3
1 2 5
3 4
6
6
Figure 3:
1)
Before starting the machine, read and
observe the operating instructions and
safety instructions.
Read and understand operator´s manual before
operating equipment.
Lower implement, stop tractor engine and
remove key before leaving operator´s
platform.
Keep all shields and guards in place.
Keep hands feet and clothing away from
moving parts.
Keep riders off the machine.
Make certain every one is clear of the machine
before starting tractor engine and starting.
Do not allow unqualified operator to run
equipment.
Do not operate equipment in transport
position.
Never lubricatem, adjust, unclog or service
the equipment with tractor engine is running.
Wait for all movement to stop before
opening shield or servicing machine.
Never work underneath equipment without
securely supporting.
To avoid serious injury or death
942 019-1
CAUTION
Order No. 942 019-1 (1x)
2)
The PTO speed must not exceed 540 rpm!
The operating pressure of the hydraulic
system must not exceed 200 bar!
939 100-4
MAX.
540/
min
MAX.
200
bar
Order No. 939 100-4 (1x)
Order No. 939 462-0 (1x)
3)
Danger in the area where rotors are turning -
keep your distance!
939 472-2
Order No. 939 472-2 (2x)
4)
While parts are moving, never
reach into areas where there is
a risk of being crushed.
Order No. 942 196-1 (2x)
To Next Page
Loading...
Need help?
General
