KTM 125 SX User Manual

11 SERVICE WORK ON THE CHASSIS 55
M01151-11
–
Mount and tighten screw

.
Guideline
Screw, top shock
absorber
M10 60 Nm
(44.3 lbf ft)
Loctite
®
2701™
M01155-10
– Position the swingarm and mount the swingarm pivot.
Info
Pay attention to the flat area

.
–
Mount and tighten nut

.
Guideline
Nut, swingarm pivot M16x1.5 100 Nm
(73.8 lbf ft)
M01149-01
– Mount the chain.
– Connect the chain with the connecting link.
Guideline
The closed side of the chain joint lock must face in the direction of travel.
M01153-10
– Position the foot brake cylinder.
Push rod

engages in the foot brake cylinder.
The dust boot is correctly positioned.
–
Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm
(7.4 lbf ft)
M01154-10
– Position the angle lever and linkage lever.
–
Mount and tighten screw cap

.
Guideline
Nut, linkage lever to angle lever M14x1.5 80 Nm (59 lbf ft)
Info
Pay attention to the flat area

.
–
Mount and tighten screw

.
Guideline
Screw, bottom shock
absorber
M10 60 Nm
(44.3 lbf ft)
Loctite
®
2701™
M01145-11
– Position the frame protector on the left and right.
–
Mount and tighten screws

and

.
Guideline
Screw, frame protector M5 3 Nm (2.2 lbf ft)
– Mount the cable tie(s).

KTM 125 SX Specifications

General

Brand	KTM
Model	125 SX
Category	Motorcycle
Language	English