KTM 1290 Super Duke GT User Manual

PREPARING FOR USE 9
153
Warning
Danger of accidents New tires have reduced road grip.
The contact surface on new tires is not yet roughened.
– Run in new tires with moderate riding at alternating angles.
Running-in phase 200 km (124 mi)
Warning
Danger of accidents The brake system fails in the event of overheating.
If the foot brake lever is not released, the brake linings drag continuously.
– Take your foot off the foot brake lever when you are not braking.
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
– Make sure that the pre-sales inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the Service & Manufacturer Warranty Booklet at vehicle handover.
– Before riding for the first time, read the entire Owner's Manual carefully.
– Get to know the controls.
– Adjust the motorcycle to your requirements, as described in the "Ergonomics" chapter.
– Get used to the handling characteristic of the motorcycle in a suitable area before making a longer trip. Try
also to ride as slowly as possible to get a better feel for the motorcycle.
– Hold handlebar firmly with both hands and keep your feet on the footrests when riding.

KTM 1290 Super Duke GT Specifications

General

Displacement	1301 cc
Torque	141 Nm
Transmission	6-speed
Seat Height	835 mm
Dry Weight	209 kg
Front Suspension	WP semi-active suspension USD Ø 48 mm
Rear Suspension	WP semi-active suspension monoshock
ABS	Bosch 9ME Combined-ABS (disengageable)
Engine Type	V-Twin, 4-stroke
Power	173 hp (127 kW) @ 9500 rpm
Fuel Capacity	23 liters
Front Brake	Dual 320 mm discs, Brembo 4-piston calipers
Rear Brake	240 mm disc, 2-piston fixed caliper
Traction Control	MTC (Motorcycle Traction Control)
Wheelbase	1482 mm
Frame	Chromoly steel trellis frame