KTM 1290 Super Duke GT User Manual

BRAKE SYSTEM 14
229
14.8 Adding rear brake fluid
Warning
Danger of accidents An insufficient brake fluid level will cause the brake system to fail.
If the brake fluid level drops below the MIN marking, the brake system is leaking or the brake linings are
worn down.
– Check the brake system and do not continue riding until the problem is eliminated. (Your authorized
KTM workshop will be glad to help.)
Warning
Skin irritation Brake fluid causes skin irritation.
– Keep brake fluid out of the reach of children.
– Wear suitable protective clothing and safety glasses.
– Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
– Consult a doctor immediately if brake fluid has been swallowed.
– Rinse the affected area with plenty of water in the event of contact with the skin.
– Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact
with the eyes.
– If brake fluid spills on to your clothing, change the clothing.

KTM 1290 Super Duke GT Specifications

General

Displacement	1301 cc
Torque	141 Nm
Transmission	6-speed
Seat Height	835 mm
Dry Weight	209 kg
Front Suspension	WP semi-active suspension USD Ø 48 mm
Rear Suspension	WP semi-active suspension monoshock
ABS	Bosch 9ME Combined-ABS (disengageable)
Engine Type	V-Twin, 4-stroke
Power	173 hp (127 kW) @ 9500 rpm
Fuel Capacity	23 liters
Front Brake	Dual 320 mm discs, Brembo 4-piston calipers
Rear Brake	240 mm disc, 2-piston fixed caliper
Traction Control	MTC (Motorcycle Traction Control)
Wheelbase	1482 mm
Frame	Chromoly steel trellis frame