16 ELECTRICAL SYSTEM
272
16.12 Adjusting the cornering light range
Preparatory work
– Check setting of the lighting system. ( p. 267)
Main work
–
Press SET button when the menu is closed.
– Press UP or DOWN button until Settings is marked.
Press SET button to open the menu.
– Press UP or DOWN button until Corner. Light Test is marked.
Press SET button to open the menu.
–
Activate menu item using the UP or DOWN button.
Info
The test is performed on the left cornering light in the
menu item Left.
The test is performed on the right cornering light in the
menu item Right.
The test is ended in the menu item Off.
– Press SET button, in order to perform the required test.
To Next Page
Loading...
Need help?
General
