KTM 250 EXC 2023 User Manual

12 SERVICE WORK ON THE CHASSIS
68
12.9 Removing the lower triple clamp (All standard models)
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 64)
– Remove the front wheel. ( p. 109)
– Remove the headlight mask with the headlight. ( p. 123)
– Remove the fork legs. ( p. 66)
– Remove front fender. ( p. 76)
– Remove the handlebar cushion.
S03514-10
Main work
–
Remove screws
1
and hang the combination instrument
holder to the side.
E00921-10
–
Remove screw
2
.
–
Loosen screw
3
. Take off the upper triple clamp with the
handlebar and hang them to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
E00922-10
–
Remove O-ring
4
. Remove protective ring
5
.
– Take off the lower triple clamp with the steering stem.
– Remove the upper steering head bearing.
12.10 Removing the lower triple clamp (All special models)
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 64)
– Remove the front wheel. ( p. 109)
– Remove the headlight mask with the headlight. ( p. 123)
– Remove the fork legs. ( p. 66)
– Remove front fender. ( p. 76)
– Remove the handlebar cushion.

KTM 250 EXC 2023 Specifications

General

Brand	KTM
Model	250 EXC 2023
Category	Motorcycle
Language	English