KTM 250 EXC 2023 User Manual

12 SERVICE WORK ON THE CHASSIS
76
12.15 Lubricating the steering head bearing
H02387-01
(All standard models)
– Remove the lower triple clamp. ( p. 68)
– Install the lower triple clamp. ( p. 69)
Info
The steering head bearing is cleaned and lubri-
cated in the course of removal and installation of
the lower triple clamp.
(All special models)
– Remove the lower triple clamp. ( p. 68)
– Install the lower triple clamp. ( p. 72)
Info
The steering head bearing is cleaned and lubri-
cated in the course of removal and installation of
the lower triple clamp.
12.16 Removing front fender
Preparatory work
– Remove the headlight mask with the headlight. ( p. 123)
V00340-10
Main work
–
Remove screws
1
.
V00341-10
–
Remove screws
2
. Take off front fender.

KTM 250 EXC 2023 Specifications

General

Brand	KTM
Model	250 EXC 2023
Category	Motorcycle
Language	English