KTM 250 SX User Manual

7 PREPARING FOR USE 21
7.6 Preparing for rides on wet and muddy surfaces
M01106-01
(All 125/150 models)
– Fit a waterproofing device on the air filter.
Waterproofing device for air filter (79006921000)
Info
See the KTM PowerParts fitting instructions.
M01103-01
(All 250/300 models)
– Fit a waterproofing device on the air filter.
Rain cover for air filter (59006021000)
Info
See the KTM PowerParts fitting instructions.
M01107-01
– Adjust the carburetor jetting and setting.
Info
Your authorized KTM workshop can recommend the right carburetor tuning.
600868-01
– Fit the steel sprocket.
– Clean the motorcycle. ( p. 107)
– Straighten bent radiator fins carefully.
7.7 Preparations for riding at high temperatures and low speeds
M01129-01
– Check the radiator cap.
Value on the radiator cap 1.8 bar (26 psi)
» If the displayed value does not equal the setpoint value:
Warning
Danger of scalding During motorcycle operation, the coolant gets
very hot and is under pressure.
– Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.
– Change the radiator cap.

KTM 250 SX Specifications

General

Brand	KTM
Model	250 SX
Category	Motorcycle
Language	English