11 SERVICE WORK ON THE CHASSIS 66
F00166-10
–
Now inject the liquid into the system until it emerges from drill hole
6
of the
master cylinder without bubbles.
– Now and then, extract fluid from the master cylinder reservoir to prevent overflow.
– Tighten the bleeder screw and remove the bleeding syringe with the hose.
– Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim 4 mm (0.16 in)
– Position the cover with the membrane. Mount and tighten the screws.
To Next Page
Loading...
Need help?
General
