11 SERVICE WORK ON THE CHASSIS 50
11.20 Removing the seat
S01230-10
–
Remove screws
1
.
S01231-01
– Raise the rear of the seat, pull the seat back, and lift it off.
11.21 Mounting the seat
S01231-11
– Mount the front of the seat on the collar bushing of the fuel tank, lower the seat at
the rear, and push the seat forward.
S01230-10
–
Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
11.22 Removing the air filter box cover
S01232-10
(All SX‑F standard models, SX‑F Factory Edition)
Condition
The air filter box cover is secured.
–
Remove screw
1
.
To Next Page
Loading...
Need help?
General
