17 SERVICE WORK ON THE ENGINE 97
17.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear of the engine.
401955-10
–
Remove oil filler plug
1
with the O-ring from the clutch cover.
– Add the same engine oil used when the last oil change was carried out.
Engine oil (SAE 10W/50) ( p. 112)
Alternative 1
Engine oil (SAE 10W/60) (00062010035) ( p. 112)
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
We recommended changing the engine oil when necessary.
– Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the
engine.
– Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
– Start the engine and check that it is oil-tight.
To Next Page
Loading...
Need help?
General
