17 TUNING THE ENGINE
130
F01059-10
Main work
– Turn the handlebar as far as possible to the right.
–
Push back sleeve
1
.
– Ensure that the throttle cable sleeve is pushed all the way into
barrel adjuster
2
.
–
Loosen nut
3
.
–
Turn barrel adjuster
2
so that there is play
A
in the throttle
cable at the throttle grip.
Guideline
Play in throttle cable 3 … 5 mm (0.12 … 0.2 in)
–
Tighten nut
3
.
–
Slide on sleeve
1
.
Finishing work
– Check the throttle grip for smooth operation.
– Install the fuel tank. ( p. 82)
– Mount the seat. ( p. 76)
– Check the play in the throttle cable. ( p. 129)
To Next Page
Loading...
Need help?
General
