12 SERVICE WORK ON THE CHASSIS
76
12.20 Removing the seat
V00342-10
–
Remove screws
1
.
– Raise the rear of the seat, pull the seat back, and lift it off.
12.21 Mounting the seat
V00343-10
– Hook in the front of the seat on the collar bushing of the fuel
tank, lower it at the rear and push it forward.
– Make sure that the seat is correctly locked in.
V00342-10
–
Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
12.22 Removing the air filter box cover
V00346-10
Condition
The air filter box cover is secured.
–
Remove screw
1
.
To Next Page
Loading...
Need help?
General
