3 WORK
12
3.5 Installing the start number plate
S05337-10
–
Position the brake line in holders
A
on the start number
plate.
–
Position the start number plate. Mount and tighten screw
1
.
The holding lugs engage in the fender.
3.6 Removing the seat
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is operated.
– Allow the voltage regulator to cool down before performing any work.
S05350-10
–
Remove screw
1
.
S05390-01
– Raise seat, pull it toward the fuel tank and take it off.
To Next Page
Loading...
Need help?
General
